Maintenance method of hydraulic pressure line pliers?

The application range of hydraulic pressure line clamp is very wide, we must know the maintenance method of hydraulic pressure line clamp before use. So you can apply it better. If you are interested in this topic, then take a look at it together, hoping to help some relevant people.

One side of the hydraulic crimping pliers is used for peeling, and it should be left when closed.1.5mmLeft and right gaps. And it's cut without a gap. The space in the middle of the "convex" shape is used to press the thread, and then you can insert a crystal head in it to see8Whether the serrations are perfectly aligned with the copper sheet. Don't press hard, or the crystal head will be scrapped. In the production process of the network cable, this hydraulic crimping pliers is one of the indispensable tools now, and it is also a major contributor to ensuring the smooth flow of the network. Hydraulic line pressing pliers are not only used for pressing network lines, but also can complete the three tasks of line cutting, stripping and line pressing. In particular, when pressing the line, it should be noted that each line should be pushed to the front of the crystal head, and the outer skin of the network cable should also enter the crystal head for two or three centimeters. The purpose is to prevent the thread from falling off and increase the contact surface. The eight wires do not need to be peeled and pressed, and the copper sheet in the crystal head will be embedded in the wire and contact the copper wire. Therefore, the hydraulic crimping pliers used for production inspection are made of beryllium bronze and aluminum bronze as raw materials. The hydraulic crimping pliers are mainly used in petroleum refining and petrochemical, coal mine, oil field, natural gas chemical industry and other industries.

The key to the maintenance of hydraulic crimping pliers is to check whether the wire is loose, clean the crimping pliers, introduce lubricating oil into the human body tubing joint, and remove the stains on the oil clamp. The embossing pliers are lightweight and durable and can be done with one hand. For example, before each shift, you can check whether each fastening screw can be loosened and whether it must be tightened. Then clean the main clamp, lamp clamp and pliers with lighter oil or diesel engine after each migration, and inject lubricating oil into each oil pipe joint. Then clean the hydraulic crimping pliers and apply butter on the jaw plate, jaw frame and mouth gear. Now it is also due to insufficient driving force. When the jaw plate cannot be stretched, the working pressure of the brake system must be tightened. The base bolts at each hole are slightly tightened, but not too tight. Note the initial temperature of the friction plate. Or query the clip every time it runs out. If there are water or oil stains, it should be treated immediately. Cleaning the nose clip with steam prevents the loss of each rolling bearing, prevents water from penetrating and destroying the demand. During maintenance, the gear oil temperature cannot exceed65C, overheating will cause the hydraulic machine management system seal failure. The gear oil must always be kept clean, and the oil filter of all ordinary oil-water separators must be used. If the oil is dirty, it should be replaced immediately. The company is committed to the expansion and development of domestic and foreign markets, using online Internet e-commerce platform and offline physical sales in two ways.

The content of the above article is about the maintenance method of hydraulic wire crimping pliers for all friends, and a better manufacturer is also shared in the content. If you have this demand, you can check it out, hoping to help you.